Automatic devices
The computerized triple automatic machine trimming immediately,and it according to setting on the panel to control the length of be trimmed thread in begin and end .It means to improve efficiency and save thread.
Solenoid Valve Control the Amount of Air Supplying
The computerized triple automatic machine control air supply base on solenoid valve.The air-indeaft time can be adjusted freely.According to the requiremeng the air-indraft time can set within 1-3 seconds after thread trimming .if for a long time sewing process, the air-indraft time also can be set within 1-3 seconds during sewing .So it can realize saving air resource 70% at least.
Computerized triple automatic machine can trim cloth belt/elastic belt easily
Automatic devices
The computerized triple automatic machine control air supply base on solenoid valve. The air-indraft time can be adjusted freely. Accordingto the
requirement the air-indraft time can be set within 1-3 seconds after thread trimming. If for a long time sewing process, the air-indraft
time also can be set within 1-3 seconds during sewing. So it can realize saving air resource 70% at least.
Optional assessories
KH/horizontal auto air-indraft thread trimming device
The thread cutting port is located horizontally behind the needle plate; when sewing operation is over, compressed air is utilized to suck in and cut off the thread loop, such that the manual thread cutting time is saved and the working efficiency is improved
KS/vertical auto air-intake thread cutting device
The thread cutting port is located vertically to right rear of the needle; when sewing is over, compressed air is utilized to suck in and cut off the thread loop, such that the thread cutting time by hand is saved and the working efficiency is improved
Vacuum bits suction device
With the aid of compressed air, waste materials occurring during sewing are collected into a cloth bag so as to guarantee the cleanliness of the working environment.
Pneumatic presser foot lifting device
Compressed air is utilized to drive the cylinder to realize presser foot lifting such that the labor intensity is reduced.
Micro-computerized pulling-force tape feeder MC/E8U
The tape feeding speed is under the control of a micro-computer such that it is synchronous with the fabric feeding action so as to ensure that the cloth can be fed uniformly and loosely during sewing operation, the sewing quality is greatly improved, the dependence on the workersЎ skill level is reduced, and the labor intensity is reduced.
Tape/fabric feeding machine MDK61
The tape feeding speed is under the control of a mechanical device so as to ensure that the cloth can be fed uniformly and loosely during sewing operation, the sewing quality is greatly improved, the dependence on the workersy skill level is reduced, and the labor intensity is reduced.
