Optional assessories

KH/horizontal auto air-indraft thread trimming device
The thread cutting port is located horizontally behind the needle plate, when sewing operation is over, compressed air is utilized to suck in and cut off the thread loop, such that the manual thread cutting time is saved and the working efficiency is improved.

KS/vertical auto air-intake thread cutting device
The thread cutting port is located vertically to right rear of the needle . when sewing is over, compressed air is utilized to suck in and cut off the thread loop, such that the thread cutting time by hand is saved and the working efficiency is improved.

Pneumatic presser foot lifting device
Compressed air is utilized to drive the cylinder to realize presser foot lifting such that the labor intensity is reduced

Vacuum bits suction device
With the aid of compressed air, waste materials occurring during sewing are collected into a cloth bag so as to guarantee the cleanliness of the working environment

Micro-computerized pulling-force tape feeder MC/E8U
The tape feeding speed is under the control of a micro-computer such that it is synchronous with the fabric feeding action so as to ensure that the cloth can be fed uniformly and loosely during sewing operation, the sewing quality is greatly improved, the dependence on the workers’skill level is reduced, and the labor intensity is reduced

Tape/fabric feeder MDK61
The tape feeding speed is under the control of a mechanical device so as to ensure that the cloth can be fed uniformly and loosely during sewing operation, the sewing quality is greatly improved,the dependence on the workers’ skill level is reduced, and the labor intensity is reduced